Step-by-Step
Installation Guide
Step 1
FIND THE START ON THE ROLL AND PEEL
BACK UNTIL YOU GET TO THE STICKY BIT
ABOUT 10-15CM
Step 2
line up with the skirting board, press
into place smoothing out any wrinkles
and trim
…pull the roll backwards smoothing the wrinkles as you go
Step 3
when you reach the end of the room
carefully cut the film with scissors or a stanley knife and press down ensuring
no edges are exposed or sticking up.
Step 4
repeat the process; overlapping
slightly to ensure liquid cannot find a way through.
go around all of the edges and make doubly sure that they are all cut neatly and pressed down firmly; 1 roll should
be enough for an average sized family room.
You’re good to go!
